Indicator Lights - Cisco Aironet 340 Series Hardware Installation Manual

Key Features

Indicator Lights

Cisco Aironet Access Point Hardware Installation Guide
1-4
The three indicator lights on top of the Access Point report Ethernet activity,
association status, and radio activity. The indicators are labeled in Figure 1-1.
Figure 1-1 Indicator Lights on the Access Point
• The Ethernet indicator signals Ethernet traffic on the wired LAN. This
indicator blinks green when a packet is received or transmitted over the
Ethernet infrastructure. The indicator blinks red when the Ethernet cable is
not connected.
The association status indicator signals operational status. Blinking green
•
indicates that the Access Point is operating normally but is not associated
with any wireless client devices. Steady green indicates that the Access Point
is associated with at least one wireless client device.
The radio indicator blinks green to indicate radio traffic activity. The light is
•
normally off, but it blinks green whenever a packet is received or transmitted
over the Access Point radio.
CISCO AIRONET 340
SERIES
11 Mbps WORKGROUP BRIDGE
S
Chapter 1 Overview
Ethernet
Status
Radio
OL-0738-01