LG LW9424 Owner's Manual page 5

Megapixel network ptz camera
Table of Contents

Advertisement

temperature, humidity and power source ratings.
Use the camera under conditions where
temperature is from -10 °C to 50 °C and humidity
is below 80 %. The input power source is AC 24 V.
Consumables
Parts having contacts such as the lens-drive
motors, cooling fan built inside the camera are
subject to wear with time. About replacement and
maintenance of such parts, please ask the nearest
service center.
Camera Installation Location
Discuss the installation location for the camera with
your retailer, and select a place that is strong enough
for the installation.
Install the camera on a ceiling (concrete, etc.) at a
location that is sufficiently strong to support it.
Install the camera body on the foundation section
of the building or sections having sufficient
bearing strength.
Never install or use the camera in the following
locations
Do not install it in areas exposed to direct
sunlight or rain.
Do not install the camera near the air outlet of an
air conditioner.
Near a swimming pool or other areas where
chemicals are used.
Food preparation areas and other locations where
there are large amounts of steam vapor and oil, in
flammable atmospheres, other special
environments.
Areas where radiation, X-rays, strong electric
waves, or magnetism is generated.
At sea, in coastal areas, or in areas where
corrosive gas is being generated.
Areas outside of the allowable ambient operating
temperature range.
About Static Electricity Removal
Before installing the camera, touch a metal case or
other metallic parts with your hand to remove static
electricity from your body.
Do not install in areas subjected to high amounts of
humidity or dust.
Doing so may cause internal components to damage
more easily or malfunction.
Do not wire cables near power lines.
Tightening the Screws
Screws should be tightened sufficiently in accordance
with the materials and structure of the installation
location. After tightening the screws, visually inspect
them to make sure there is no unevenness and that
each screw is tight.
5
Safety Information

Advertisement

Table of Contents
loading

Table of Contents