LG LW9424 Owner's Manual page 40

40
Remote Configuration
Day&Night
Day&Night Mode : To provide clear images in low
lighting condition, the IR cut filter moves
automatically. This technology can be operated by
Day & Night lens or Filter changeable mechanism on
board.
Day(color): Deliver color image regardless of light
Night(Black & White): Deliver B/W image regardless
of light
Auto : Automatically switches between Day mode and
Night mode by detecting light condition to have best
images.
Night to Day transition threshold : Configures a
parameter to make IR cut filter start working. This
parameter can be configured 0~28 and its factory
default is 6.
White Balance
Please refer to the followings for white balance modes
supported by the camera.
Auto : Calculates white balance using color
information of whole screen.
Manual : Manually changes Red and Blue offset(gain).
Range should be 0~255
Indoor : 3200K Base Mode
Outdoor : 5800K Base Mode
Outdoor Auto : This is an auto white balance mode
specifically for outdoors. It allows you to capture
images with natural white balance in the morning and
evening.
Auto Explosure
AE Mode
Full Auto : Automatically controls Iris, Gain and Shutter
speed(59.94/NTSC; 1/60S, 50/PAL; 1/50S). In this mode,
DSS (Digital Shutter
Compensation can be enabled.
Manual : A user controls Shutter (21 Step), Iris (14
Step) and Gain (16 Level).
Shutter Priority : A user controls Shutter (21 Step)
speed. Iris and Gain are automatically changed.
Iris Priority : A user controls Iris (14 Step, F1.6~Close).
Shutter speed and Gain are automatically changed.
Bright : A user controls Bright manually. A camera
algorithm controls Gain and Iris automatically.
DSS(Digital Shutter Speed): When DSS is enabled,
the rate of input image is controlled automatically to
generate images having reasonable illumination. That
Speed) and Back Light
is, the rate of input image can be reduced in low
illumination environment. DSS Limit is used to
configure the minimum rate of input image. When it
is set to 1/4 for example, automatic increase of digital
shutter speed is limited to 1/4 second. In other words,
input of 4 images per second is guaranteed.
BLC (Back Light Compensation): It is an ability of a
camera to balance the lighting in a scene with an
extremely bright background such as sunlight. It helps
to obtain the finest light contrast and get clear image.
This function can be set to On/Off.
ETC
Digital Zoom
LW9424 provides Optical x20 and Digital x12, totally
x240. (f=4.7 ~ 94mm)
Aperture Level
Aperture Level is used to enhance edge of object. Its
option has 16 levels. The higher value is selected, the
better edge can be obtained. This option is effective
in adding Alphanumeric with Burn-in-OSD.
WDR (Wide Dynamic Range): WDR combines two
fields which are high shutter speed exposure in bright
areas and low shutter exposure in dark areas into one
composite image. It helps to get clear images from
dark parts of the image without saturation from the
bright part.
Image Flip / Mirror
Vertically or horizontally flips images. After installing
LW9424, properly adjust this option to have proper
images. The factory default is Flip Off / Mirror Off.
Noise Reduction
reduces noise in images. To have enhanced images
from noisy images, use this option. The higher value is
selected, the better image can be obtained. 1~5 and
OFF are available. The Factory Default is Off.
Focus mode
has 2 focus modes, "Focus Auto" or "Focus Manual".
Focus Near/Far buttons on Live View will work when
"Focus Manual" is selected.
Freeze on Position Move
Holds the image of the start preset and releases the
images the end preset. This function is useful to save