LG LW9424 Owner's Manual page 27

Serial Port Configuration
Serial Port Information
This camera supports one RS-485 serial port
The camera's serial port is configured with the DIP
switch in the camera. Serial Port Information section
just displays the information. DIP switch setting is
effective only after the camera is rebooted. By default,
LG Multix protocol is used with 9600bps baudrate.
Sensor Type
There is two sensor input ports on LW9424. The
sensor port can be configured to the following.
Function Operation
OFF Not used
The port is normally open and activated
NO (Normally Open)
when closed.
NC (Normally The port is normally closed and activated
Closed) when opened.
The function of the sensor port is set based on the
type of the sensor connected.
Sensor Schedule
Choose Sensor OFF or Sensor ON and click the
below schedule cells to make Sensor Schedule
according to day of week and hour.
Click desired "Cell" to set schedule.
Click desired "Time Line or Date Line" to set schedule.
To set all cells in the schedule, click below "Empty
Cell".
Remote Configuration
27