PDi -P19LCDC User Manual page 43

Channel Setup
The Add/Delete Channels menu provides access to both Analog and Digital Channels.
6. Press the VOL+/- or ◄/► direction buttons to select the Analog channel number. Then press
the CH+/- or ▲/▼ direction buttons to select Add/Delete Analog Channel. Use the VOL+/- or
◄/► direction buttons to select Added or Deleted.
7. Press the CH+/- or ▲/▼ direction buttons to select Enabled/Disabled Digital Channels menu.
Then press the VOL+/- or ◄/► direction buttons to enter. A status listing of the current
memorized channels is shown.
8. Select the channel to be changed using the CH+/- or ▲/▼ direction buttons. Use the VOL+/- or
◄/► direction buttons to change the status to Enabled or Disabled.
9. Press the SETUP button to return to the preceding menu.
42
Document Number: PD196-120 Rev 2