PDi -P19LCDC User Manual page 41

Channel Setup
7. Press the VOL+/- or ◄/► direction buttons to set the Channel Sequence in which the channels
are displayed after searching.
Internal A+D: In the order of channel number regardless of the system.
All A then D: Digital channels are displayed after all analog channels.
8. Press the CH+/- or ▲/▼ direction buttons to select the Service Level you wish to program. The
menu displays the current programming status of each level as either Programmed or Blank.
Note: A Programmed service level can also be re-programmed if desired.
9. Press the ► direction button to start auto programming.
10. A confirmation menu will appear before proceeding. Press either the CH+ or▲ direction button
to start auto programming. Press the CH - or ▼ direction button to cancel the operation. The
TV will now search all available channels. Auto programming may require service minutes to
complete.
11. Press the SETUP button to return to normal TV viewing.
40
Document Number: PD196-120 Rev 2