WARNING
CAUTION : To reduce the risk of electric shock do not remove cover (or back). No user
serviceable parts inside. Refer servicing to qualified service personnel.
This symbol is intended to alert the user of the presence of uninsulated 'dangerous
voltage' within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user of the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
NOTE TO CABLE TV INSTALLER
This reminder is provided to call the cable TV systems installer's attention to Article 820-40 of the
National Electrical Code. The code provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the building, as close
to the point of the cable entry as practical.
MAINTENANCE AND SERVICING
Never remove the back cover of the TV; this can expose you to high voltage and other hazards. If the
TV does not operate properly, unplug it and call an authorized service center or PDI .
CLEANING AND DISINFECTION
Clean the exterior of this television by removing dust with a lint-free cloth.
CAUTION: To avoid damage to the surface of the television, do not use abrasive or chemical cleaning
agents.
RAIN AND MOISTURE
WARNING: To avoid the hazards of fire or electrical shock, DO NOT expose this television to
rain or moisture.
OXYGEN ENVIRONMENT
WARNING: Do not use in any oxygen tent or oxygen chamber. Such use may cause a fire
hazard.
WET LOCATION
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
OVERHEAD FALLING HAZARD
WARNING: To prevent injury, this apparatus must be securely attached to the wall in
accordance with the installation instructions. TVs can pose a striking hazard when mounted at
an elevated position. Use only PDI mounting brackets and appropriate hardware to
assure TV will not fall from the mounted position. Failure to do so may cause injury or
death.
2
Document Number: PD196-120 Rev 2
Need help?
Do you have a question about the PDI-P19LCDC and is the answer not in the manual?