Exhaust System, Emission Controls - 2.5L Cbta, Cbua; Fastener Tightening Specifications - Volkswagen Golf 2013 Quick Reference Specification Book

Exhaust System, Emission Controls –
2.5L CBTA, CBUA

Fastener Tightening Specifications

Component
Clamp nut
Exhaust manifold-to-cylinder head nut
Front cross member-to-underbody nut
Front exhaust pipe with catalytic converter-to-exhaust
manifold nut
1)
Heat shield-to-exhaust manifold bolt
Heat shield-to-front exhaust pipe with catalytic converter
- Front bolts
- Rear bolts
Intake manifold support-to-cylinder block bolt
Intake manifold support-to-Secondary Air Injection (AIR)
pump motor bushing nut
Oxygen Sensor (O2S)
Secondary Air Injection (AIR) sensor 1-to-pressure tube
bolt
Secondary Air Injection (AIR) solenoid valve-to-cylinder
head bolt
Suspended mount-to-subframe bolt
Suspended mount-to-underbody bolt
Replace fastener(s).
1)
102 VW Golf & GTI Quick Reference Specification Book • September 2012
1)
Nm
25
25
23
25
10
10
5
25
10
55
2
10
25
25