Nikon eclipse lv150 Instruction Manual page 66

7. List of Control Commands
Identification
code
c
c
c
c
r
r
r
c
r
s
c
8. Response to Control Commands
[c] [RCW] [<CR>]
Rotates nosepiece in forward direction to the next address.
→ When properly finished [o] [RCW] [<CR>]
→ When control error occurred [n] [RCW] [error code] [<CR>]
[c] [RCR] [<CR>]
Rotates nosepiece in reverse direction to the next address. (Rotation from address 1 to address
5 is prohibited.)
→ When properly finished [o] [RCR] [<CR>]
→ When control error occurred [n] [RCR] [error code] [<CR>]
[c] [RCC] [<CR>]
Rotates nosepiece in reverse direction to the next address.
→ When properly finished [o] [RCC] [<CR>]
→ When control error occurred [n] [RCC] [error code] [<CR>]
[c] [RDC] [p] [<CR>]
Rotates nosepiece to the specified address (p: 1 to 5).
→ When properly finished [o] [RDC] [<CR>]
→ When control error occurred [n] [RDC] [error code] [<CR>]
[r] [RAR] [<CR>]
Reads nosepiece address.
→ When properly finished [a] [RAR] [p] [<CR>]
→ When control error occurred [n] [RAR] [error code] [<CR>]
[p]: Nosepiece address 0, 1, 2, 3, 4, or 5 ("0" when address unidentified.)
64
Command Data
RCW - Rotates the nosepiece in forward direction to the next address.
RCR - Rotates the nosepiece in reverse direction to the next address.
(However, rotation from nosepiece address 1 to 5 is prohibited.)
RCC - Rotates the nosepiece in reverse direction to the next address.
Rotates the nosepiece to the specified address (p: 1 to 5).
RDC p
RAR - Reads the nosepiece address.
VER - Reads the program version.
PNM - Reads the program name.
SAS - Sets the status output setting.
SAR - Reads the status output setting.
SAE - Outputs the status.
DEF - Initializes the control data (factory default).
Specifications