Nikon eclipse lv150 Instruction Manual page 65

(2) When the status output of this unit is enabled;
External device
Receiving a status
Receiving a status
External device
Receiving a status
Receiving a status
(3) When an external light source is attached and the control for the external light
source shutter is enabled;
External device
Receiving a command
Receiving a command
*1: The unit status will be sent when the nosepiece is rotated by using the forward/reverse rotation
switch, when the nosepiece is rotated by using the communication command, or when the
objective goes out of the optical path.
*2: The unit status will be sent when the the rotation driven by the motor ends or when the
objective comes into the optical path.
*3: The shutter close command will be sent when the nosepiece is rotated by using the forward/
reverse rotation switch, when the nosepiece is rotated by using the communication command,
or when the objective goes out of the optical path.
*4: The shutter close command will be sent when the the rotation driven by the motor ends or
when the objective comes into the optical path.
V. External Communications Control
This unit
Switch operation
(manual rotation)
Sending format
Sending a status *1
Control processing
Sending format
Sending a status *2
This unit
Receiving format
Receiving a command
Sending format
Sending a status *1
Control processing
Sending format
Sending a command response
Sending format
Sending a status *2
This unit
Switch operation
(manual rotation)
Closing the shutter
Sending a command *3
Control processing
Opening the shutter
Sending a command *4
63