Microscopy
This chapter describes the procedures for each microscopy.
This microscope can be configured with two types of illuminators, LV-UEPI or LV-UEPI2. See the
table below for the microscopies available with each illuminator, as well as the optional accessories
required for each microscopy.
● If the microscope has not yet been assembled, see "IV. Assembly" on p.45 first.
● See "III. Operation of Each Part" on p.26 for how to operate each part of the microscope.
Microscope
Procedure
Bright-field
p.16 to 17
microscopy
Dark-field
p.18 to 19
microscopy
Differential
p.20 to 21
interference
contrast (DIC)
microscopy
p.22 to 23
Simplified
polarization
microscopy
Sensitive
p.24
polarization
microscopy
Epi-
p.25
fluorescence
microscopy
Illuminators
Required accessories (optional)
LV-UEPI
–
LV-UEPI2
LV-UEPI
BD objective
LV-UEPI2
BD quintuple nosepiece, universal quintuple nosepiece
or motorized universal quintuple nosepiece*
(The standard sextuple nosepiece cannot be used
for dark-field microscopy.)
LV-UEPI
Polarizer
LV-UEPI2
Analyzer
DIC slider
Universal quintuple nosepiece or motorized universal
quintuple nosepiece*
Objectives marked "LU"
(Objectives marked "LU" are suitable for DIC
microscopy.)
LV-UEPI
Polarizer
LV-UEPI2
Analyzer
LV-UEPI2
Polarizer
Lambda plate
Analyzer
LV-UEPI2
Filter cube
(Up to two cubes can be attached.)
Fluorescence excitation light balance filter (optional)
* For the LV150A only.
15