Applicable Standards - Siemens MICROMASTER 430 Operating Instructions Manual

Applicable Standards

E Applicable Standards
European Low Voltage Directive
The MICROMASTER product range complies with the requirements of the Low
Voltage Directive 73/23/EEC as amended by Directive 98/68/EEC. The units are
certified for compliance with the following standards:
EN 61800-5-1 Adjustable speed electrical power drive systems,
EN 60204-1
European Machinery Directive
The MICROMASTER inverter series does not fall under the scope of the Machinery
Directive. However, the products have been fully evaluated for compliance with the
essential Health & Safety requirements of the directive when used in a typical
machine application. A Declaration of Incorporation is available on request.
European EMC Directive
When installed according to the recommendations described in this manual, the
MICROMASTER fulfils all requirements of the EMC Directive as defined by the
EMC Product Standard for Power Drive Systems EN 61800-3.
Underwriters Laboratories
UL and CUL LISTED POWER CONVERSION EQUIPMENT.
ISO 9001
Siemens plc operates a quality management system, which complies with the
requirements of ISO 9001.
106
Part 5-1: Safety requirements –
Electrical, thermal and energy
Safety of machinery - Electrical equipment of machines
http://nicontrols.com
MICROMASTER 430 Operating Instructions
6SE6400-5AE00-0BP0
Issue 10/06