Options; Device-Independent Options; Device-Dependent Options - Siemens MICROMASTER 430 Operating Instructions Manual

Issue 10/06
8

Options

An overview of the options available for the MICROMASTER 430 is given in this
section. For further information about options, please refer to the catalog or the
documentation CD.
8.1

Device-independent options

Basic Operator Panel 2 (BOP-2)
PROFIBUS module
PC to inverter connection kit
BOP/AOP door mounting kit for single inverter control
"DriveMonitor" and "Starter" commissioning tool
8.2

Device-dependent options

Frame Sizes C to F
Gland plate (Frame size C)
EMC filter, Class A
EMC filter, Class B (Frame size C)
Line commutating choke
Output choke
LC Filter
CAUTION
If using output chokes or LC filters operation is only permissible with a pulse
frequency of 4 kHz. Make shure that the automatic pulse frequency reductions are
disabled.
Coercing required parameter adjusting: P1800 = 4 kHz , P0290 = 0 or 1.
Frame Sizes FX and GX
Line commutating choke
EMC filter, Class A (power commutating choke required)
LC Filter
CAUTION
If using output chokes or LC filters operation is only permissible with a pulse
frequency of 4 kHz. Make shure that the automatic pulse frequency reductions are
disabled.
Coercing required parameter adjusting: P1800 = 4 kHz , P0290 = 0 or 1.
MICROMASTER 430 Operating Instructions
6SE6400-5AE00-0BP0
http://nicontrols.com
8 Options
87