Spray System - Jenn-Air JDB9600AW Technical Education

3.20

Spray system

The spray system consists of 3 spraying levels: the lower and upper
spray arms and an optional roof shower head. Water is supplied to the
upper spray arm and the roof shower head via the supply pipe
attached to the inside of the tank rear panel. This pipe is connected to
the pump sump by a direct plug-and-socket connection.
The supply pipe has 2 separate water channels. As a result, the upper
spray arm and the optional roof shower head can be actuated
separately.
The upper spray arm is attached by its inlet pipe directly to the top
basket. The supply pipe is connected by a coupling. Optionally, the
height can be adjusted by max. 3 levels (Rackmatik).
The lower spray arm is connected by its bearings directly to the pump
sump. It has a nozzle on the underside to clean the surface filter and
to rinse dirt into the filter system.
Appliances without a water switch do not have the roof shower head.
Both spray arms can only be operated simultaneously.
1 Roof shower/roof spinner (optional)
2 Coupling for upper spray arm
3 Supply pipe
4 Water switch (optional)
5 Heating pump
6 Pump sump
7 Lower spray arm
8 Upper spray arm