Table of Contents
Advertisement
5.26
Replacing flow sensor
Requirement:
►
Side panel on left removed
Risk of breakage
►
Do not bend or kink boards with a flow sensor in
the flask!
►
Component is very sensitive!
Carefully bend out the plastic flap on the heat exchanger / water inlet.
Loosen plug-and-socket connection
1.
Take complete board with flow sensor out of the catch
mechanisms.
2.
Unpack new flow sensor, take board out of transportation safety
device and dispose of holder.
3.
Carefully attach new board to the heat exchanger / water inlet.
Reconnect power supply and bend back plastic flap.
Hide quick links:
Advertisement
Table of Contents
