Table of Contents
Advertisement
5.33
Replacing the Aquasensor
Requirement:
►
Base panel and base plate removed.
5.33.1 Removal
1.
Loosen catch mechanism.
2.
Rotate Aquasensor housing by 90° to the left.
3.
Pull out forwards.
5.33.2 Installation
Insert and lock board.
1.
Press Aquasensor with board edgewise into the pump sump.
2.
Rotate 90° to the right and lock in position.
Seal
►
To facilitate rotating the Aquasensor, the seal can be
lubricated with Promol or rinse aid.
Hide quick links:
Advertisement
Table of Contents
