Panel Operation - Tally Dascom 1145 User Manual

Tally Dascom 1145/1125+
Table 4.3
LED
L1
L2
L3
L4

4.3 Panel Operation

There are 3 states of operation: Online, Setup and Power On.
In the Online state, the keys provide the following functions: Go to Tear Off position, Line
Feed/Form Feed, Load/Eject, Clear Buffer and switch to offline state for accessing to Setup
state.
In the Setup state, the keys provide font selection, and micro feed paper.
To enter the Power On state, the user holds down a key or a combination of keys while
powering up the printer. This state provides the following functions: Hex-dump, Main Menu
setup, print Main Menu, Customize Form, restore factory defaults, and firmware update.
The followings describe the 3 states in details.
Legend:
[A] = press and hold switch A
{B} = press and then release switch B
[A]+ {B} = press switch B while holding A
Function
Power/Paper Out
Font1
Font2
Online
19