Control Panel Operation - Tally Dascom DT-210 User Manual

Tally Dascom DT-210/230
2 Control Panel Operation
LED indicators and key

Power LED
Power LED turns on while printer is powered on.
Error LED
Error LED turns on means error occurs.
Paper LED
Paper LED turns on means paper near end or paper end.
Feed key
Press Feed key to feed paper.

Self‐test
Turn off the power after roll paper loaded, hold down the Feed key while printer is powering on, then
the self‐test page is printed out. "If you want to continue SELF‐TEST printing, please press Feed key."
would be printed out after the current printer status is printed, also Paper LED would be turned on;
Press Feed key to continue the character printing. After a number of lines are printed, the printer
indicates the end of the self‐test by printing "*** completed ***".
 Hexadecimal Dumping
Open the Printer Cover, load roll paper and turn the power on while holding down Feed key, and then
close the Printer Cover, the printer would run Hexadecimal Dumping printing mode.
Press Feed key for three times to exit Hexadecimal Dumping printing mode.

LED indicators
Description
Printer Cover is open
Roll paper is sufficient
Roll paper end
Roll paper near end
POWER ERROR PAPER BEEPER
On On On
On Off Off
On On On
On Off On
Short beep for twice and long beep for
once
No beep
Short beep for three times
No beep
18