Control Panel Keys - Tally Dascom 1145 User Manual

Tally Dascom 1145/1125+

4.2 Control Panel Keys

"Tear Off" Key:
When online, this key will move any loaded continuous paper to the tear-off position. When in
setup state, this key is used to select the desired font.
"LF/FF" Key:
Pressing this key will feed paper one line forward. By holding down this key, the printer will
initially feed a few lines, then perform a form feed (continuous paper mode) or eject the form
(single sheet mode).
"Load/Eject" Key:
When paper is loaded, pressing this key will eject the paper (single sheet mode) or park the
paper (continuous paper mode). When paper is not loaded, pressing this key will load the
paper to the starting print position.
"Online" Key:
This key switches the printer between online and offline states. Printing is stopped when the
printer is switched to offline state. When printer is switched to online state again, printing will
resume.
Table 4.1
Font Selection Label
Tear Off
Draft
Draft Condensed
Roman
Sans Serif
Courier
Prestige
Script
Others
(see Menu setting)
Table 4.2
Switch
S1
S2
S3
S4
L2 State
Blink
Off
Off
Off
On
On
On
Blink
Blink
Label
Tear off
LF/FF
Load/Eject
Online
18
L3 State
Blink
Off
On
Blink
Off
On
Blink
Off
On