Paper Setup - Tally Dascom 1145 User Manual

Tally Dascom 1145/1125+

5.2 Paper Setup

Paper Setup
2.5, 11/4, 3, 3.5,11/3, 4,
5, 5.5, 6, 7, 8, 9, 10, 11,
Single
FormLen 12, 14, A4, B4,
Customize
0, 1/6, 1/4, 1/3, 1/2, 2/3,
Single Top
3/4, 1, Define
0, 1/6, 1/4, 1/3, 1/2, 2/3,
Single Bottom
3/4, 1, Define
-7, -6, -5, -4, -3, -2,
Single Left
-1, 0, 1, 2, 3, 4, 5, 6, 7,
Mrg (1.00mm)
Define
Single Top -7, -6, -5, -4, -3, -2,
Mrg (0.01") -1, 0, 1, 2, 3, 4, 5, 6, 7
Single Auto Disable, 0.5sec, 1sec,
Load 1.5sec, 2sec
2.5, 11/4, 3, 3.5, 11/3, 4,
Fanfold
5, 5.5, 6, 7, 8, 9, 10, 11,
FormLen
12, 14, A4, B4, Define
0, 1/6, 1/4, 1/3, 1/2, 2/3,
Fanfold Top
3/4, 1, Define
Fanfold 0, 1/6, 1/4, 1/3, 1/2, 2/3,
Bottom 3/4, 1, Define
-7, -6, -5, -4, -3, -2, -1, 0,
Fanfold Left
Mrg (1.00mm) 1, 2, 3, 4, 5, 6, 7, Define
Fanfold Top -7, -6, -5, -4, -3, -2, -1, 0,
Mrg (0.01") 1, 2, 3, 4, 5, 6, 7
Fanfold Auto
No, Yes
Load
Skip No, Yes
Valid Settings
Sets the page length for single paper
Defines the separation in inches from the top
edge of a single paper to the first print line.
Defines the separation in inches from the bottom
edge of a single paper to the last print line.
Compensation value added to Single Left Mrg.
Compensation value added to Single Top.
Defines the settling time before a single sheet is
loaded.
Disable: Press the【Load/Eject】key manually
to load a single sheet.
Sets the Page Length for fanfold.
Defines the separation in inches from the top
edge of a fanfold to the first print line.
Define the separation in inches from the bottom
edge of a fanfold to the last print line.
Compensation value added to Fanfold Left Mrg.
Compensation value added to Fanfold Top.
Yes: The printer loads paper to the first printing
position automatically when using fanfold.
No: Press the【Load/Eject】key to load paper
when using fanfold.
Skips printing on perforation area.
Only valid to fanfold.
Yes: Blank lines between 2 pages.
No: No blank lines between 2 pages.
25
Function