Answering Calls - Yealink SIP-T46G User Manual

Press ,
With the optional headset connected, press
-
Enter the desired number using the keypad.
Press ,
The SIP-T46G IP phone can handle multiple calls at a time. However, only one active call (the call
that has audio associated with it) can be in progress at any time, other calls are placed on hold.
The SIP-T46G IP phone can handle a maximum of 50 calls at one time.
To place multiple calls:
You can have more than one call on your SIP-T46G IP phone. To place a new call during an
active call, do one of the following:
Press the line key. The active call is placed on hold.
-
Enter the desired number using the keypad.
Press ,
- Press
Press the NewCall soft key.
Enter the desired number using the keypad.
Press ,
You can press
retrieve the desired call.
If multiple accounts are registered on the phone, you can first press the desired line key on the
Note
idle screen or press the Line soft key on the dialing screen, and then you can use the selected
account to place a call.

Answering Calls

When you are not in another call, you can answer a call in one of three ways:
Using the handset

Using the speakerphone

Using the headset

You can reject incoming calls by pressing the X key or the Reject soft key. You can also activate
Note
Do Not Disturb mode to ignore the incoming calls without ringing on your phone. For more
information, refer to
You can forward incoming calls to someone else by pressing the FWD soft key. For more
information, refer to
, or the Send soft key.
, or the Send soft key.
, or the Send soft key.
or the Hold soft key to place the original call on hold.
, or the Send soft key.
or to switch between calls, and then press the Resume soft key to
Do Not Disturb (DND)
Call Forward on page 57.
to activate the headset mode.
on page 55.
Basic Call Features
51