Yealink SIP-T46G User Manual page 56

User Guide for the SIP-T46G IP Phone
Usage:
Press the Transfer key to dial out the number specified in the Value field, and then perform the
attended or semi-attended transfer.
Note If the Value field is left blank, the
Transfer soft key during a call. For more information, refer to
Hold
You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies:
Usage:
Press the Hold key during an active call to place the call on hold.
1.
Press the Hold key again to retrieve the held call.
2.
DND
You can use this key feature to enable or disable DND. You can also use this key feature to
access the custom DND screen. For more information, refer to
55.
Dependencies:
Usage:
Press the DND key to access the custom DND screen. You can enable or disable DND for one or
all accounts.
Note
When DND is activated, the DND key LED will illuminate solid green, and the incoming calls will
be rejected automatically.
Group Listening
You can use this key feature to activate the Speakerphone and Handset/Headset mode at the
same time. It is suitable for the group conversations which have more than one person present
at one end. You are able to speak and listen through the handset/headset, while the others
nearby can only listen through the speaker.
Dependencies:
46
Transfer
Type (Key Event)
Key Type (Hold)
Label (key label displayed on the LCD screen)
Type (Key Event)
Key Type (DND)
Label (key label displayed on the LCD screen)
Type (Key Event)
Key Type (Group Listening)
Label (key label displayed on the LCD screen)
key performs the same as the TRANSFER key or the
Call Transfer
Do Not Disturb (DND)
on page 61.
on page