Reboot & Upgrade & Reset Issues - Yealink SIP-T46G User Manual

Why doesn't the phone ring?
Check the ringer volume on the phone. To adjust the ringer volume setting, press the Volume
key when the phone is on-hook and idle. For more information, refer to
Why does the phone play a tone when there is a call on hold?
When there is a call on hold, the phone will play a hold tone every 30 seconds. Call hold tone is
enabled by default. You can disable the call hold tone. For more information, refer to your
system administrator.
Reboot & Upgrade & Reset Issues
How to reset the phone?
To reboot the phone:
Press Menu->Settings->Reset&Reboot->Reboot.
1.
Press the Enter soft key.
2.
The LCD screen prompts the following warning:
Press the OK soft key.
3.
How to reset the phone?
Reset the phone to factory configurations after you have tried all troubleshooting suggestions
but do not solve the problem.
Three ways to reset the phone:
Full Reset: All configurations and userdata on the phone will be reset.

Config Reset: All configurations (e.g., account, call history) set on the phone will be reset.

Userdata Reset: All custom data (e.g., ring tone) set on the phone will be reset.

Contact your system administrator before resetting the phone.
To reset the phone:
Press Menu->Settings->Reset&Reboot->Reset to Factory.
1.
Press
2.
or , or the Switch soft key to select the desired type from Reset Option
Troubleshooting
Volume on page 24.
65