Network Conference - Yealink SIP-T46G User Manual

User Guide for the SIP-T46G IP Phone
Do one of the following:
2.
Enter the number you want to transfer the call to.
-
Press
Press the Contacts soft key, and then select the desired group and search for the
-
contact.
Press
After the party answers the call, press
3.
transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can cancel the transfer before the call is connected by pressing the Cancel soft key.

Network Conference

You can use network conference feature on the SIP-T46G IP phone to conduct a conference with
multiple participants.
To set up a network conference call:
Place a call to the first party.
1.
Press the Conference soft key to place a new call.
2.
The active call is placed on hold.
Enter the number of the second party and then press
3.
When the second party answers the call, press the Conference soft key to add the second
4.
party to the conference.
Press the Conference soft key to place a new call.
5.
The conference is placed on hold.
Enter the number of the new party and then press
6.
When the new party answers the call, press the Conference soft key to add the new party
7.
to the conference.
Repeat steps 5 to 7 until you have added all intended parties.
8.
The procedures to set up a network conference call on specific servers may be different from
introduced above. Contact your system administrator for more information.
62
or to dial out.
, or the Send soft key to dial out.
or the Transfer soft key to complete the
, , or the Send soft key.
, , or the Send soft key.