Yealink SIP-T46G User Manual page 68

User Guide for the SIP-T46G IP Phone
Press or
3.
Depending on your selection:
4.
If you select Always Forward, you can enable it for a specific account.
a)
Press
1)
Forward field.
Enter the destination number you want to forward all incoming calls to in the
2)
Forward to field.
You can also enable always forward for all accounts. After always forward was enabled
for a specific account, do the following:
Press
1)
Press the All Lines soft key.
2)
The LCD screen prompts "Copy to all lines?".
Press the OK soft key to accept the change or the Cancel soft key to cancel.
3)
b) If you select Busy Forward, you can enable it for a specific account.
Press
1)
Forward field.
58
to select the desired forwarding type, and then press the Enter soft key.
or , or the Switch soft key to select Enabled from the Always
or to highlight the Always Forward field.
or , or the Switch soft key to select Enabled from the Busy