Ending Calls - Yealink SIP-T46G User Manual

User Guide for the SIP-T46G IP Phone
Answering When Not in Another Call
Call duration and destination will always appear on the LCD screen for the active call.
To answer a call using the handset:
Pick up the handset.
1.
To answer a call using the hands-free speakerphone mode:
Do one of the following:
Press
-
- With the handset on-hook and the headset mode deactivated, press the Answer soft key.
- With the handset on-hook and the headset mode deactivated, press the line key with the
fast flashing green LED indicator.
To answer a call using the headset:
Do one of the following:
- Press
With the headset mode activated, press the Answer soft key.
-
With the headset mode activated, press the line key with the fast flashing green LED
-
indicator.
Answering When in Another Call
If you have an active call, and an incoming call arrives on the phone, do one of the following:
Press the Answer soft key.
-
The incoming call is answered and the original call is placed on hold.
Press to access the new call.
-
Press or the Answer soft key.
The incoming call is answered and the original call is placed on hold.

Ending Calls

To end a call:
Do one of the following:
- If you are using the handset, press
If you are using the headset, press
-
- If you are using the speakerphone, press
When a call is placed on hol d, you cannot press
Note
key to resume the call, and then press
52
.
.
, the EndCall soft key or hang up the handset.
, or the EndCall soft key.
, or the EndCall soft key.
to end it. You shoul d press the Resu me soft
to end it.