Danfoss VLT FC 322 Instruction Manual page 57

Warnings and Alarms VLT® Automation VT Drive FC 322 D-Frame Instruction Manual
No. Description
244 Heatsink temp
245 Heatsink sensor
246 Pwr. card supply
247 Pwr. card temp
248 Illegal PS config
250 New spare part
251 New type code
Table 8.2 Warning/Alarm Action List
(X) Dependent on parameter
1)
Can not be Auto reset via 14-20 Reset Mode
A trip is the action when an alarm has appeared. The trip will coast the motor and can be reset by pressing the reset
button or make a reset by a digital input (parameter group 5-1* [1]). The origin event that caused an alarm cannot damage
the or connected parts. A Trip Lock situation can only be reset by a power cycling.
8 8
8-4 MG21E122 - VLT® is a registered Danfoss trademark
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20776-Danfoss-131X8139-VLT-Automation-VT-Drive-VFD-FC322-230V-20-HP.aspx
Warning Alarm/Trip Alarm/Trip Lock Parameter Reference
X X X
X X
X X
X X
X X
X
X X