Table of Contents
Advertisement
Transfer files with CSI 2140
8.
9.
Manually add a wireless network
You can manually set up a wireless network in the analyzer without being in range of the
wireless signal. You can then connect to the network when your analyzer is within range.
Prerequisites
Ensure the wireless radio in the analyzer is enabled.
44
Option
Description
Enter the host name of your computer. This computer should be on your
F4 Set Host
Name
wireless network and it should have AMS Machinery Manager installed. This
value must match what is set in AMS Machinery Manager for the CSI 2140
Setup Options.
If your network includes a DHCP server (DHCP enabled), enter the
computer name. Otherwise, enter the IP Address of the computer. For
additional text tools, press the ALT key and different set of characters
appears.
F5 Set IP
Enter the IP address of the host computer.
Address
F6 Set Host
Enter the TCP/IP port number to use to establish communication between
Port
the analyzer and the host computer. This value must match what is set in
AMS Machinery Manager for the CSI 2140 Setup Options. Use the default
value (10077) unless otherwise directed by technical support.
Press Enter.
On the analyzer, open a program and select Connect For Transfer using a path below.
Choose the program that corresponds to the file type you want to transfer.
Program
Analyze
Balance
ODS/Modal
Program Manager
Route
Transient
Note
If you experience issues when trying to connect, press the F9 IP/release/renew option to reset
the DHCP process.
Both the analyzer and AMS Machinery Manager display a message indicating the
connection was made. You can now transfer files between the opened program and
AMS Machinery Manager.
Key sequence to Connect for Transfer option
Home > F7 Analyze > ALT > F9 Connect For Transfer
Home > F9 Balance > F12 Job Manager > F7 Connect For Transfer
Home > F12 ODS/Modal > F8 Job Manager > F7 Connect For Transfer
Home > F6 Program Manager > F8 Connect For Transfer
Home > F8 Route > ALT > F9 Route Mgnt > F7 Connect For Transfer
Home > F11 Adv. Transient > F8 Job Manager > F7 Connect For Transfer
Advertisement
Table of Contents
