Table of Contents
Advertisement
7.
6.2.8
Add a measurement
You can add measurements to a job before or after you collect the data. After you collect
data, press F9 Store Data and add a measurement.
Note
A job can contain different measurement types.
Procedure
1.
2.
3.
4.
6.2.9
Delete a measurement
1.
2.
3.
4.
5.
6.
7.
6.2.10
Delete data from the current measurement point
1.
2.
Option
Description
Enter up to three characters to identify the measurement point for input 1.
F2 Edit ID
Enter up to three characters to identify the measurement point for input 2.
F3 Edit ID
F4 Edit ID
Enter up to three characters to identify the measurement point for input 3.
Enter up to three characters to identify the measurement point for input 4.
F5 Edit ID
F6 Edit Descript Enter up to 20 characters to describe the equipment.
Press Enter.
From the Analyze main menu, press F9 Job Setup.
To switch between internal memory or a memory card, press F1 Change Job > F3
Change Location.
Select a job and press F4 Select Job.
Press F4 Add New Meas.
Each time you press F4 Add New Meas, a new measurement is added. "No Data"
appears in the bottom of the screen for each measurement.
From the Analyze main menu, press F9 Job Setup.
To switch between internal memory or a memory card, press F1 Change Job > F3
Change Location.
Select a job and press F4 Select Job.
Press F3 Edit This Job.
Use the up and down arrow keys to select a measurement.
Press F6 Delete Meas.
Press Enter.
From the Analyze main menu, press F9 Job Setup.
To switch between internal memory or a memory card, press F1 Change Job > F3
Change Location.
Analyze and Advanced Analyze
99
Advertisement
Table of Contents
