Chapter 5 Plots; View A Full Screen Version Of The Plot; Select An Active Plot - Emerson CSI 2140 User Manual

5 Plots
Topics covered in this chapter:
•
•
•
•
•
•
•
•
•
•
When you collect or review data, the analyzer displays the information as one or more
plots. You can modify the plots at any time. Use plotting tools to examine your data. Mark
frequencies with a cursor, determine harmonics, and expand or compress the axis with the
plot functions. The following chapter describes the plot functions available in all programs
on the analyzer.
Each program lets you display data as a waveform and spectrum. You can display multiple
graphs at one time.
5.1

View a full screen version of the plot

When you select full screen view, the plot displays on the entire screen and the function
keys do not display.
Procedure
1.
2.
3.
5.2

Select an active plot

Any keys you press or changes you make apply to only the active plot.
Procedure
1.
View a full screen version of the plot
Select an active plot
Switch the plot type
Add or remove a cursor
Change the cursor type
Change the scale of the x and y axis
Expand or compress the X axis
View the highest frequency peaks on the spectrum plot
Set RPM
View fault frequencies
Plot the data.
With a plot displayed, press F4 Full Screen.
Press Back to close the full screen view.
Plot the data.
Plots
87