Initial Commissioning - wtw Cond 1970i Operating Manual

Commissioning
Connecting the plug-in
power supply unit
Setting the date and
12
3
1 Connect the plug (1) to the socket (2) of the measuring instru-
ment.
2 Connect the original WTW plug-in power supply (3) to an easily
accessible mains socket.
3.3

Initial commissioning

Perform the following activities:
For mains operation and charging the battery: Connect the plug-in
power supply (see section 3.2 P
Set the date and time.
1 Press the <M> key and hold it down.
time
2 Press the <ON/OFF> key.
The display test appears briefly on the display.
3 Press the <RUN/ENTER> key repeatedly until the date flashes
on the display (Day.Month display indicator).
).
OWER SUPPLY
ba75692e02
Cond 1970i
2
1
07/2009