wtw Cond 1970i Operating Manual page 37

Cond 1970i
Outputting stored data
to the interface
ba75692e02 07/2009
Note
If you want to search for a certain element (e.g. date), proceed as fol-
lows:
1 Using <RUN/ENTER>, select the element (e.g. date).
2 Press <▲> or <▼> repeatedly until the required date appears
on the display.
After approx. 2 s the temperature of the displayed measured
value appears.
1 Press the <RCL> key repeatedly until Sto SEr appears on the
display.
pH
S
I S T
O
Sal
Time Baud D S E
Day.Month No.
Year Ident
Tref25 Tref20 Auto Store
LoBat nLF Lin Oxi Cal TEC
2 Press the <RUN/ENTER> key.
The complete storage content is transmitted to the interface;
during the data transmission the numbers of the currently
transmitted storage locations run through. After the data trans-
mission, the measuring instrument automatically switches to
the measuring mode.
Note
You can cancel the transmission with <M> or <RUN/ENTER>.
After the instrument number, the printout contains the complete storage
contents in ascending order of the storage location numbers.
mV / pH
o
% mg/l
S/
m
cm
1/ cm Sal
r
C
°
/
% K
TP
REL1 REL2
ARng AR RCL
Operation
37