Cond 1970i
Mains operation and
charging the battery
Charging time of the
battery
ba75692e02
07/2009
3
Commissioning
3.1
Scope of delivery
Portable measuring instrument, Cond 1970i with integrated re-
chargeable battery
Carrying and positioning handle
Carrying strap
Sensor quiver
Plug-in power supply unit
Operating manual
3.2
Power supply
You can either operate the measuring instrument with the integrated re-
chargeable battery or with the plug-in power supply. The plug-in power
supply supplies the measuring instrument with low voltage (12 V DC).
At the same time, the rechargeable battery is charged.
approx. 16 hours. The battery is charged even when the instrument is
switched off. The LoBat display indicator appears when the battery is
nearly empty and has to be charged as soon as possible.
Warning
The line voltage at the operating site must lie within the input voltage
range of the original plug-in power supply (see chapter 7 T
).
TA
Warning
Use original plug-in power supplies only (see
chapter 7 T
ECHNICAL DATA
).
Commissioning
-
ECHNICAL DA
11