wtw Cond 1970i Operating Manual page 35

Cond 1970i
Switching off AutoStore
ba75692e02 07/2009
6 Confirm with <RUN/ENTER>.
The prompt for the ID number appears on the display.
pH S
4 9
I
O
Sal
Time Baud F R E
Day.Month No.
Year Ident
Tref25 Tref20 Auto Store
LoBat nLF Lin Oxi Cal TEC
7 Set the required ID number with <▲> <▼>.
8 Confirm with <RUN/ENTER>.
The instrument switches to the measuring mode and starts the
measuring and saving process.
AutoStore flashes on the display.
Note
The AutoStore function is interrupted if you start other functions, e.g.
output the data storage.
After the function is finished, the AutoStore function is continued. By
this, however, temporal gaps in the recording of the measured values
will occur.
Switch AutoStore off by:
setting the save interval (Int 1) to OFF, or
switching the measuring instrument off and then on again.
mV / pH
9
%
mg/l
S/
m
cm
1/ cm Sal
1
C
°
/
% K
TP
REL1 REL2
ARng AR RCL
Operation
35