Positioning Equipment; Plumbing; Clearances - Aquacal HeatWave SuperQuiet SQ120R Installation Manual

3.2 Positioning Equipment

Controlling Irrigation and Rainwater Runoff
Irrigation water may damage heat pump components. Have irrigation water directed away from the heat pump.
l
The heat pump will withstand normal rainfall. Do not allow a roof slope to direct rainwater onto the heat pump.
l
Have a gutter installed on the roof edge to direct this water away from the heat pump. Or install the heat pump in
another location.
Planning for Condensation
The heat pump can produce a large amount of water in the form of condensation. The amount of water
depends on air temperature and humidity.
Install the heat pump with enough height to allow for water drainage.
l
Plan for water drainage disposal as needed.
l
Mounting Pad Requirements
Build the heat pump pad out of concrete or another code-approved material.
l
Confirm the pad can support the weight of the heat pump. See "Weights" on page 40.
l
Elevate the pad enough to allow for drainage.
l
Make sure the pad is flat and level.
l
Have the pad extend at least 6 inches from the heat pump base in all directions.
l
Do not install the heat pump on soil or grass.
l
Do not allow the heat pump base to touch the buildings foundation.
l
Do not place the heat pump directly on a concrete floor inside a building. This can cause noisy equipment
l
vibration. Install vibration dampeners between the heat pump base and floor.
Equipment pad must meet all requirements of authorities having code-related jurisdiction.
l
Anchoring to Pad
Follow all applicable local, state, and national requirements regarding wind load anchoring.
l
The shipping brackets used to tie the heat pump to the pallet are approved mounting (hurricane) brackets. They
l
can be used to anchor the heat pump to the pad.
If needed, contact AquaCal
l
heat pump model number and serial number when requesting support. See "Identifying Model Specifications" on
page 39.

3.3 Plumbing

3.3.a Clearances
Proper air circulation is required for the heat pump to operate efficiently. Avoid placing objects near or on top of
l
the heat pump. This includes shrubbery and lawn furniture. These objects will also hinder maintenance access.
Avoid storing chemical containers near the heat pump. The chemicals can cause equipment damage.
l
Page - 5
®
Customer Support to obtain the correct anchoring kit information. Please have the