Buttons; Indicator Lights; Display - Aquacal HeatWave SuperQuiet SQ120R Installation Manual

4.4.a Buttons

Buttons

Display Lock
Pool / Spa
Up Arrow
Down Arrow
Mode
4.4.b Indicator Lights
Indicators
Pool
Spa
Heating
Cooling
Water Temp
Desired Temp
4.4.c Display

Display

75
FLO
OFF
888
Sliding your finger across the buttons from left to right will
temporarily disable the display lock.
Select either the pool or the spa thermostat.
Used to increase temperature set point and navigate
though menu options.
Used to decrease temperature set point and navigate
though menu options.
Select heat pump's operating mode.
The Heat Pump is referencing the pool thermostat.
The Heat Pump is referencing the spa thermostat.
Indicates the unit is heating the water.
Please note - the compressor must be operating before this
light will illuminate.
Indicates the unit is cooling the water.
Please note - the compressor must be operating before this
light will illuminate.
Indicates current water temperature.
Indicates temperature set point is displayed. This is
displayed when "UP" or "DOWN" is selected.
The heat pump is on and displaying the current water
temperature. In this example 75° F is displayed.
No water flow is detected. The filter pump is off or heat
pump is not receiving correct water flow.
The heat pump has been turned off via the mode selector
button or the temperature set point has been lowered
below 45° F.
The control program is initializing. This displays only as
power is applied to the heat pump. The program version
number will then be displayed.
Description
Description
Description
Page - 24