Weights; Initial Heating Recommendations; Initial Cooling Recommendations; Available Accessories - Aquacal HeatWave SuperQuiet SQ120R Installation Manual

Up to 70gpm flow rate
Hide thumbs Also See for HeatWave SuperQuiet SQ120R:
Table of Contents

Advertisement

7.2 Weights

NOTE:
Specifications subject to change.
Model Type
®
TropiCal
®
TropiCal
®
TropiCal
®
TropiCal
®
TropiCal
®
TropiCal
HeatWave SuperQuiet
HeatWave SuperQuiet
HeatWave SuperQuiet
HeatWave SuperQuiet
HeatWave SuperQuiet
Table 7 - Equipment Weight

7.3 Initial Heating Recommendations

The following recommendations will reduce the amount of time required to heat a pool. If unsure of
equipment heating capability, review equipment data plate. See "Identifying Model Specifications" on
page 39.
1. Confirm heat pump mode has been set to HEA .
2. Set thermostat to desired water temperature.
3. Temporarily override the filter pump's time-clock for continuous operation.
This will allow the Heat Pump the time required to heat the water at start-up.
l
After the water has reached the desired temperature, the time-clock can be reset to normal operating
l
time-frames.

7.4 Initial Cooling Recommendations

The following recommendations will reduce the amount of time required to cool a pool or cold plunge
application. If unsure of equipment cooling capability, review equipment data plate. See "Identifying
Model Specifications" on page 39.
1. Confirm heat pump mode has been set to COO .
2. Set thermostat to desired water temperature.
3. Temporarily override the filter pump's time-clock for continuous operation.
This will allow the Heat Pump the time required to cool the water at start-up.
l
After the water has reached the desired temperature, the time-clock can be reset to normal operating
l
time-frames.

7.5 Available Accessories

5 lb Bypass Valve Kit (Kit STK0135)
When high flow rates are outside recommended tolerances, please use this kit or an alternative bypass valve
l
system.
Model Number
T035
T055
T075
T090
T115
T135
®
SQ120R
®
SQ125
®
SQ145
®
SQ166R
®
SQ225
Install Weight
188 Pounds
180 Pounds
200 Pounds
255 Pounds
259 Pounds
287 Pounds
268 Pounds
268 Pounds
328 Pounds
328 Pounds
328 Pounds
Page - 40

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents