Aquacal HeatWave SuperQuiet SQ120R Installation Manual page 44

This kit can be used to control excessive water flow through the heat pump. It provides automatic flow
l
adjustments for most applications.
Automatic Sequencing Controller
An Automatic Sequencing Controller (ASC) provides easy control of all units from one lead unit and prevents the
l
simultaneous start-up of multiple heat pumps.
Site voltage drop is minimized and utilities are not subjected to large in-rush demands of electrical current.
l
Part number is based on number of heat pump's to be controlled. Call AquaCal
l
with correct configuration.
External Flow Relay (Grid Flow) Switch Kit (0040s)
Used when the pool / spa elevation is higher than the heat pump.
l
Used when a variable two-speed filter pump set on low-speed mode does not provide enough water pressure to
l
activate a heat pump's water pressure switch.
Also used for automatic pool / spa thermostat switching.
l
Liquid Blankets
An invisible liquid heat barrier designed to retain heat and extend the swimming season.
l
®
AquaCal recommends the Aqua Blanket™.
l
Plumbing Unions:
SIZE PART NUMBER
2 INCH 2627
Remote Control Kit (STK0070)
A remote (wired) control kit allows for full control of the heat pump from up to 100 feet from the equipment.
l
Page - 41
®
Customer Support for assistance