ADJ Vizi Q Wash7 User Instructions page 20

Vizi Q Wash7
2. Press the LEFT or RIGHT buttons until "Software. V" is displayed,
press ENTER.
3. The software version will now be displayed.
4. Press MODE to exit.
TEST
Reset. M - With this function you can reset the Pan & Tilt motors.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that "Test" is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until "Reset. M" is displayed.
3. Press ENTER to reset or press MODE to exit.
Test. Chan - With this function you can test each channel function.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that "Test" is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until "Test. Chan" is displayed,
press ENTER.
3. Use the LEFT or RIGHT buttons to scroll through the various chan-
nels.
4. Press ENTER to select a channel to test or press MODE to exit.
Panel. Ctrl - With this function you can make fine adjustments.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that "Test" is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until "Panel. Ctrl" is displayed,
press ENTER.
3. Use the LEFT or RIGHT buttons to scroll through the various func-
tions.
4. Press ENTER when you find the function you would like to adjust
or press MODE to exit.
ADJ Products, LLC - www.adj.com - Vizi Q Wash7 Instruction Manual Page 38
System Menu Vizi Q Wash7
Calibrate - With this function you can calibrate and adjust the effects
wheels to their correct positions. The Calibration password 050.
NOTE: ONLy qUALIFIED TECHNICIANS SHOULD PERFORM
THIS FUNCTION.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that "Test" is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until "Calibrate" is displayed,
press ENTER.
3. "XXXX" will be displayed. The password is 050.
4. Press ENTER to confirm or press MODE to exit.
PROGRAM
EDIT PROGRAM: - The fixture comes equipped with a built-in DMX
recorder that allows custom programs to be installed and recalled
directly from the fixture's control board. Programs can be created and
stored using the fixture's control board or by using an external DMX
controller.
Select. Pro – This function allows the user to select one of nine of
the user defined built-in programs. This program is then accessed in
"Function Mode" under "Program Run."
Edit. Pro – This function allows the user to edit the built-in programs.
Edit. Sce – This function allows the user to edit or define the actual
scenes that are stored in the user defined built-in programs that are
accessed in the previous step.
Sce. Input - The Vizi Q Wash7 features an integrated DMX recorder.
Preprogrammed scenes can be transmitted to the fixture via any
DMX compliant controller. This function allows those scenes to be
stored in to the fixture's built-in memory and then subsequently used
to create the user-defined programs.
ADJ Products, LLC - www.adj.com - Vizi Q Wash7 Instruction Manual Page 39
System Menu