ADJ Vizi Q Wash7 User Instructions page 16

Vizi Q Wash7
that "Function" is higlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until "Fan Set" is displayed, and
press ENTER. The current setting will now be displayed.
3. "Head Fan" will now be displayed, press ENTER.
4. Use the LEFT or RIGHT buttons to make the adjustments to the
fan.
5. Press ENTER to confirm your selection or press the MODE button
to return to the main menu.
LCd.Set
Backlight - With this function you can have the LCD display after
2-60 minutes. Use this function to adjust the time.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that "Function" is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until "LCD.Set" is displayed,
press ENTER.
3. Press LEFT or RIGHT buttons, until "Backlight" is displayed, and
press ENTER.
4. "05m" (5 minutes) will be displayed, use the LEFT or RIGHT but-
tons to adjust the shutoff time between 02m-60m or "Off".
5. Press ENTER to confirm your selection or press MODE to exit.
Flip Display - With this function you can rotate (flip) the display 180
degrees.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that "Function" is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until "LCD.Set" is displayed,
press ENTER.
3. Press LEFT or RIGHT buttons, until "Flip Display" is displayed,
and press ENTER.
4. Either "Off" or "On" will be displayed, use the LEFT or RIGHT but-
ADJ Products, LLC - www.adj.com - Vizi Q Wash7 Instruction Manual Page 30
System Menu Vizi Q Wash7
tons to toggle between.
5. Press ENTER to confirm your selection or press MODE to exit.
Key Lock - With this function activated the buttons will lock autom-
matically after 15 seconds.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that "Function" is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until "LCD.Set" is displayed,
press ENTER.
3. Press LEFT or RIGHT buttons, until "Key Lock" is displayed, and
press ENTER.
4. Either "Off" or "On" will be displayed, use the LEFT or RIGHT but-
tons to toggle between.
5. Press ENTER to confirm your selection or press MODE to exit.
DispFlash - With this function active, the display will flash when the
DMX signal is lost.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that "Function" is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until "LCD.Set" is displayed,
press ENTER.
3. Press LEFT or RIGHT buttons, until "DispFlash" is displayed, and
press ENTER.
4. Either "Off" or "On" will be displayed, use the LEFT or RIGHT but-
tons to toggle between.
5. Press ENTER to confirm your selection or press MODE to exit.
dim Curve
Dim Curve - With this function you can change dimmer curve setting
for LED. See page 44 for the Dimmer Curve Chart.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that "Function" is highlighted, then press ENTER.
ADJ Products, LLC - www.adj.com - Vizi Q Wash7 Instruction Manual Page 31
System Menu