ADJ Vizi Q Wash7 User Instructions page 19

Vizi Q Wash7
4. Either "Off" or "On" will be displayed, use the LEFT or RIGHT but-
tons to toggle between.
5. Press ENTER to confirm your selection or press MODE to exit.
Timer Pin - Timer Pin will allow you to clear the running time. See
Clear Last for more information.
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Information" is highlighted, then press
ENTER.
2. Press the LEFT or RIGHT buttons until "Time. Info" is displayed,
press ENTER.
3. Press LEFT or RIGHT buttons, until "Timer Pin" is displayed, and
press ENTER.
4. The "Timer Pin" is 050.
5. Press ENTER to confirm or press MODE to exit.
Clear Last - This will allow you to clear the LED running time. You
need to put in the Timer Pin before doing this. Please see Timer Pin.
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Information" is highlighted, then press
ENTER.
2. Press the LEFT or RIGHT buttons until "Time. Info" is displayed,
press ENTER.
3. Press LEFT or RIGHT buttons, until "Clear Last" is displayed, and
press ENTER.
4. Either "Off" or "On" will be displayed, use the LEFT or RIGHT but-
tons to toggle between.
5. Press ENTER to confirm or press MODE to exit.
Temp. Info - This will allow you to check the moving head tempera-
ture.
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Information" is highlighted, then press
ADJ Products, LLC - www.adj.com - Vizi Q Wash7 Instruction Manual Page 36
System Menu Vizi Q Wash7
ENTER.
2. Press the LEFT or RIGHT buttons until "Temp. Info" is displayed,
press ENTER.
3. "Head Temp." will now be displayed, press ENTER.
4. "XXX" will now be displayed. "XXX" represents the current tem-
perature of the moving head.
5. Press MODE to exit.
Error. Info - This will allow you to see any errors that have occured.
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Information" is highlighted, then press
ENTER.
2. Press the LEFT or RIGHT buttons until "Error. Info" is displayed,
press ENTER.
3. Any errors that have occured to Pan, Tilt, etc will now be dis-
played.
4. Press MODE to exit.
Model. Info - This will allow you to see the model name
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Information" is highlighted, then press
ENTER.
2. Press the LEFT or RIGHT buttons until "Model. Info" is displayed,
press ENTER.
3. The model name will now be displayed.
4. Press MODE to exit.
Software. V - This will allow you to see the software version you are
currently running.
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Information" is highlighted, then press
ENTER.
ADJ Products, LLC - www.adj.com - Vizi Q Wash7 Instruction Manual Page 37
System Menu