Canon MB2100 Series Online Manual page 749

Enter the recipient's fax/telephone number again.
Sending Faxes after Checking Information (Checking Recipient's
Information)
Set Check RX FAX information to ON following the procedure below.
Important
• This function is not available when you send a fax manually.
Sending Fax after Speaking on Telephone
1. Make sure that printer is turned on.
2. Select Setup on HOME screen.
Using the Operation Panel
3. Select Device settings, and then press OK button.
4. Select FAX settings, and then press OK button.
5. Select Security control, and then press OK button.
6. Select Check RX FAX information, and then press OK button.
7. Select ON, and then press OK button.
Important
• Transmission will be canceled if the printer fails to receive the recipient's fax information or if the
received information does not match the fax/telephone number.
749