Canon MB2100 Series Online Manual page 741

When you hear a high-pitched signal instead of the recipient's voice, you cannot check whether the
recipient can receive faxes. If you want to stop sending the fax, replace the handset. If you want to send
the fax, go to step 8.
8. Ask recipient to set recipient's fax device to receive faxes.
9. When you hear a high-pitched signal, press Color button or Black button.
Press the Color button for color transmission, or the Black button for black & white transmission.
Important
• Color transmission is available only when the recipient's fax device supports color faxing.
10. Hang up handset.
Note
• To cancel a fax transmission, press the Stop button. To cancel a fax transmission while it is in
progress, press the Stop button, and then follow the instructions on the LCD.
• If documents remain in the ADF after the Stop button is pressed while scanning is in progress,
Document in ADF. Select
remaining documents are automatically ejected.
to eject document. is displayed on the LCD. By pressing OK, the
741