Canon MB2100 Series Online Manual page 513

5. Select Activate wireless LAN and press OK button.
If you do not use the printer over wireless LAN, select Disable LAN.
Changing Direct Connection Setting
Change the settings for the direct connection following the procedure below.
1. Make sure printer is turned on.
2. Select Setup on HOME screen.
LCD and Operation Panel
3. Select Device settings and press OK button.
4. Select LAN settings and press OK button.
5. Select Other settings and press OK button.
6. Select Direct connection settings and press OK button.
7. Select an item and press OK button.
• To update the identifier (SSID) and the password for direct connection
Selecting A and pressing the OK button displays the confirmation screen. To update the
identifier (SSID) and the password, select Yes and press the OK button.
To check the security setting and the updated password, press the right Function button
select Yes on the screen displayed next and press the OK button.
• To change the printer's name displayed on the Wi-Fi Direct compatible device
Selecting B and pressing the OK button displays the screen to specify the device name.
Follow the procedure below to change the name.
1. Press OK button.
2. Enter device name (up to 32 characters).
513