Canon MB2100 Series Online Manual page 816

Note
• CALLER HISTORY may not be supported depending on the country or region of purchase.
1. Make sure that printer is turned on.
2. Load paper.
3. Select FAX on HOME screen.
Using the Operation Panel
The Fax standby screen is displayed.
4. Select Function list, and then press OK button.
The Function list screen is displayed.
5. Select Print reports/lists, and then press OK button.
6. Select report or list you want to print, and then press OK button to start printing.
• When you select Directory list:
Select Recipient or Group dial, and then press OK button.
If you select Recipient, select whether to print RECIPIENT TELEPHONE NUMBER LIST in
alphabetical order, and then press the OK button. If you select Yes, the printer prints
RECIPIENT TELEPHONE NUMBER LIST in alphabetical order. If you select No, the printer
prints RECIPIENT TELEPHONE NUMBER LIST in numerical order.
If you select Group dial, the confirmation screen is displayed. Select Yes, and then press OK
button. The printer prints GROUP DIAL TELEPHONE NO. LIST.
• When you select an item other than Directory list:
The confirmation screen is displayed. Select Yes, and then press OK button.
The printer prints the selected report or list.
Errors When You Send Fax
If an error occurs when you send a fax, the error number is printed on ERROR TX REPORT or ACTIVITY
REPORT (there are some errors for which the cause is also printed).
The causes corresponding to the error numbers are as follows.
No. Cause
#001 Document is jammed
in the ADF.
Action
The document is jammed in the ADF.
When the error is cleared, redo the operation.
816