Canon MB2100 Series Online Manual page 295

Note
• You cannot use the same printer name as that already used for other LAN connected devices.
• You cannot use a hyphen for the initial or last character of the printer name.
◦ TCP/IP settings
Performs IPv4 or IPv6 setting.
◦ WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows 10, Windows
8.1, Windows 8, Windows 7, and Windows Vista).
■ Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
• When this setting is enabled, the printer icon is displayed on the Network Explorer in
Windows 10, Windows 8.1, Windows 8, Windows 7, and Windows Vista.
■ Optimize inbound WSD
Selecting Enable allows you to receive the WSD printing data faster.
■ WSD scan from this device
Selecting Enable allows you to transfer the scanned data to the computer using WSD.
■ Timeout setting
Specifies the timeout length.
◦ Bonjour settings
Setting items for LAN using Bonjour for Mac OS.
■ Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
■ Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
• You cannot use the same service name as that already used for other LAN connected
devices.
◦ LPR protocol setting
Enables/disables the LPR setting.
◦ RAW protocol
Enables/disables RAW printing.
◦ LLMNR
Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting Active allows the
printer to detect printer's IP address from the printer name without a DNS server.
295