Canon MB2100 Series Online Manual page 676

3. Select PC and press OK button.
4. Select computer to forward scanned data and press OK button.
Select Local (USB) for a USB-connected computer, or select the computer to forward the scanned data
for a network-connected computer.
The Scan standby screen is displayed.
Note
• When you forward the scanned data to the computer using WSD (one of the network protocols
supported in Windows 10, Windows 8.1, Windows 8, Windows 7, and Windows Vista), select
Enable for WSD scan from this device on WSD setting on Other settings in LAN settings
under Device settings.
WSD setting
If you press the left Function button, the printer starts searching for the connected computers
again.
5. Select document type.
Note
• When you forward the scanned data to the computer searched using WSD, you cannot select the
document type.
676