Canon MB2100 Series Online Manual page 801

6. Hang up handset to finish using service.
Using Rotary Pulse Line
• Dialing by Using the On Hook Dial Function
Note
• You can use the on hook dial function only when Hook key setting in Security control under
FAX settings is set to Enable.
Security control
1. Make sure that printer is turned on.
2. Select
Using the Operation Panel
The Fax standby screen is displayed.
3. Press center Function button.
4. Use Numeric buttons to dial number of information service.
5. When recorded message for information service answers, press Tone button to switch to tone
dialing.
6. Use Numeric buttons to press numbers in accordance with message.
7. Press center Function button to finish using service.
• Dialing by Using the Telephone Connected to the Printer
1. Make sure that printer is turned on.
2. Select
Using the Operation Panel
The Fax standby screen is displayed.
3. Lift handset of telephone.
4. Use telephone to dial number of information service.
5. When recorded message for information service answers, use telephone to switch to tone dialing.
When you dial the number of the information service using the telephone connected to the printer,
you cannot use the printer to switch to tone dialing. For instructions on how to switch to tone
dialing, refer to your telephone's instruction manual.
6. Use telephone to press numbers in accordance with message.
7. Hang up handset to finish using service.
FAX on HOME screen.
FAX on HOME screen.
801