Blaupunkt CRP9BK Owner's Manual page 9

CRP9BK
TO USE THE SLEEP TIMER
1. When the radio is being played, press and hold RADIO/SLEEP to enter the sleep mode.
The SLEEP and the sleep time "05" (5 minutes) appear on the display.
2. Press the RADIO /SLEEP again as needed to adjust the sleep timer from 5, 10, 15, 30, 45,
60, 75, 90, 120 or OFF.
3. When the display reverts to time display, press and hold RADIO /SLEEP once to show the
sleep time remaining.
4. The radio will remain active for the programmed sleep time and then shut ofautomatically.
5. To turn off the radio before the sleep time has elapsed, press
TO USE THE PROJECTION (operated with the AC/DC adaptor only)
1. Press once to turn on the projection.
2. Press once again to activate auto scrolling function to view the current Indoor
temperature (rounded to the nearest digit) and the current time for 5 seconds alternately.
Press / C / F to select degree Celsius or degree Fahrenheit temperature readout in
projection view.
3. Press once again to turn off the projection.
4. When the projection is on, press and hold
the right side of the projector, use the rotary knob to rotate the projected time by around
90 degree.
TO USE THE HI-LO-OFF DIMMER OF THE LCD BACKLIGHT
Simply press
only be done when the adaptor is being used to power the clock radio.
Remarks: if only the backup batteries are being used to power the clock radio, press
once to activate the backlight for 5 seconds and then it will go off again.
TO USE AUTO DIM BACKLIGHT
You can program your clock radio to automatically dim down the backlight for 5-12 hours
everyday.
1. At normal time display mode, press and hold
"OFF" flashes. Press
2. Press once, "0:00" flash, press
3. Press once, 9Hr flash, press
4. Press once to complete the setting.
pressed in approximate 10 seconds at any time during set-up, the clock radio will revert to
normal time display.
Remarks:
1. During auto dim function is activated, press button can select the backlight manually. Auto
dim function will be activated automatically again same time in the next day.
2. Auto Dim function only works when the AC/DC adaptor is being used to power your clock
radio. It does not work when it is powered by the backup batteries only.
3. To completely turn off the Auto Dim function, repeat Step 1 above and select OFF.
disappears on the LCD.
TO DISPLAY TEMPERATURE IN DEGREE °C OR °F
Simply press / C/F to display temperature in degree °C or in degree °F.
TO CHARGE MOBILE PHONE WITH THE USB PORT(5V/1A)
Connect the charging cable of your mobile phone to the A-type USB port at the back of the
unit, then connect the other end to your mobile phone. The clock radio will charge the mobile
phone automatically.
once to adjust the brightness (Hi/ Lo/ Off ) of the LCD backlight. This can
or to select "ON" to activate the auto dim backlight function.
or
or
to flip the projection view upside down. At
, until the display shows
to set auto dim starting hours.
to set auto dim duration from 5Hr to 12Hr.
remains static on the LCD display. If no key is
7
once.
and