Blaupunkt CRP9BK Owner's Manual page 8

CRP9BK
6. Press SET/ AL SET again to complete set-up. If no key is pressed in approximate 10
seconds at any time during set-up, the clock will exit the alarm set-up mode.
TO SET ALARM 2
At normal time display, press SET / AL SET twice, default alarm time 6:00 and A2 appear, and
reference alarm setting procedure for the rest operation.
TO TURN ON / OFF ALARM 1 AND 2
1. Press AL 1.2/ON.OFF once to activate Alarm 1,
2. Press once again to activate Alarm 2,
3. Press once again to activate both Alarm 1 and 2. Both
4. Press once again to deactivate both alarms icons disappear.
TO STOP AND RESET THE ALARM TO COME ON THE NEXT DAY
When alarm 1 or 2 is sounding, the related alarm icon flashes. Press the AL 1.2/ON.OFF once
to stop the alarm and reset it to come on the following day. After that both
remain on the display. The alarm volume will increase graduate in 3 levels.
TO ACTIVATE THE SNOOZE FUNCTION (default snooze duration is 5 minutes)
When alarm is sounding, press
after the set snooze duration.
Note: if your second alarm activates while the first alarm is sounding or it is in the snooze
mode, the second alarm
overrides the first alarm (the first alarm is reset to come on the next day).
TO SET UP THE FM ANTENNA
Extend the FM wire antenna fully and vary the direction for best FM reception. Do not strip,
alter or attach to other antennas.
TO LISTEN TO THE FM RADIO
1. To turn on the radio, press RADIO/SLEEP once, the display shows "rd" and then the radio
frequency readings "87.5"in Mhz.
2. Press / to tune the radio to a desired station. Press and hold
next clear station.
3. To adjust the volume, press VOL once, the display shows "L10", press
volume from L00 (no sound) to L15 (maximum) . Press VOL to store the volume setting.
4. Press once to turn off the radio.
Remark: keep your radio away from fluorescent lamps or other electronic devices, which may
cause interference to the radio. In order to get better reception, please try to move
the unit next to window or adjust the antenna for better signal reception.
TO USE THE PRESET MEMORY OF RADIO
This clock radio features a total of 10 preset memories of FM stations. These allow you to
preset your favorite stations and access them quickly.
1. Turn on the radio and select a radio station you like to memorize.
2. Press and hold the SET until "MEM" appears and "01" flashes. Press SET / AL SET once to
store Memory 1.
3. Press or to select another station you like to memorize. Then press and hold SET/ AL
SET until "MEM" appears and "01" flashes. Press
once to store Memory 02.
4. Repeat Step 2 to 3 to preset memories 3 through 10.
5. To access a preset station at any time, press the SET/ AL SET once at a time while the radio
is on.
6. To edit a preset station, select another station and then repeat Step 2 to 4. This overrides
the original settings.
appears.
appears.
once, the alarm will be silenced and come on again
or
6
and appear.
or to scan for the
or
to select '02", press SET/ AL SET
and/or
to adjust